Product ID:IBM 4019
MSDS Date:06/15/1993
FSC:6850
NIIN:00N054011
MSDS Number: BVXJJ

ASPEN IMAGING INTERNATIONAL INC

555 ASPEN RIDGE DR
LAFAYETTE, CO 80026-9300
US

Emergency Phone: 303-666-5750; 800-955-5555

Info Phone: 303-666-5750; 800-955-5555

Cage: 65521

ASPEN IMAGING INTL INC

LAFAYETTE, CO 80027-5000 US

Telephone: 800-955-5555

Cage: 65521

STYRENE ACRYLATE COPOLYMER; (STYRENE/ACRYLIC COPOLYMER

CAS: 25153-46-2

OSHA PEL N/K

ACGIH TLV: N/K

IRON OXIDE

CAS: 1317-61-9

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

IRON (III) OXIDE; (IRON OXIDE FUME)

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE)

PROPENE POLYMERS; (POLYOLEFIN)

CAS: 9003-07-4

RTECS: UD1842000

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

CHROMATE(1-), BIS

CAS: 31714-55-3

OSHA PEL N/K

ACGIH TLV: N/K

SILICA GEL; (AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXPOS UNDER NON-DUSTY
CNDTNS SHOULD NOT CAUSE ANY SIGNIFICANT HLTH EFT. UNDER DUSTY
CNDTNS, IRRIT MAY OCCUR W/SOME ACCUM OF TONER DUST IN NOSE &
THROAT. SKIN: SHOULD NOT BE SIGNIFICANT H AZ FROM DERMAL EXPOS.
EYES: TONER DUST MAY CAUSE CONJ IRRIT BUT NO CHEM IRRIT/DMG TO
EYE/ITS PARTS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INGEST: ACCIDENTAL INGEST OF TONER
MAY CAUSE NAUS. NO KNOWN/REPORTED EFTS FROM RPTD INGEST OF PROD.
CHRONIC: RPTD INHAL UNDER NON-DUSTY CNDTNS SHOULD NOT CAUSE
SIGNIFICANT HLTH HAZ. RPTD INH AL OF HIGH CONC OF TONER HAS CAUSED
LUNG EFTS & DMG IN LAB ANIMALS. BASED ON THESE STUDIES, EXCESSIVELY
DUSTY (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . EYES:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUT
ES, OCCASIONALLY LIFTING UPPER & LOWER EYELIDS. IF EYE IRRITATION
DEVELOPS, SEEK MEDICAL ATTENTION. SKIN: NOT A SKIN IRRITANT. WASH
WITH SOAP & WATER TO REMOVE.

Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID INHALATION OF SMOKE. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:AS W/ALL COMBUSTIBLE MATERIALS IN A
FINELY DIVIDED STATE, EXTREMELY HIGH CONCENTRATIONS IN AIR MAY
CREATE AN EXPLOSIVE MIXTURE. ELIMINATE SOURCES OF IGNITION.

Spill Release Procedures:LOOSE TONER MAY BE VACUUMED OR SWEPT. RESIDUE
MAY BE REMOVED WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL-VENTILATED
AREA. DO NOT INCINERATE.
Other Precautions:AVOID REPEATED OR PROLONGED INHALATIONS OF EXCESSIVE
DUST. DO NOT TAKE INTERNALLY. AVOID CONTACT WITH SKIN, EYES AND
CLOTHING.

Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN PRINTER
EQUIPMENT. USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:FOR USE OTHER THAN NORM OFFICE PRINTER,
OPERATING PROC (SUCH AS BULK TONER PROCESSING FACILITY) EYE PROT &
(SUPDAT)
Work Hygienic Practices:NONE LISTED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: CONDITIONS SHOULD BE AVOIDED. OTHER PROT EQUIP:
NIOSH/MSHA APPROVED RESPIRATORS MAY BE REQUIRED IF UNDER DUSTY
CONDITIONS.

HCC:N1
Spec Gravity:1.3-1.5
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER; FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:ABNORMALLY HIGH AIRBORNE CONCENTRATIONS OF
DUST CAN PRESENT THE POSSIBILITY OF AN EXPLOS IF IGNITABLE SOURCE
IS PRESENT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:REMOVE TO AN APPROVED LANDFILL SITE AND DISPOSE
OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.